Solar Cooking
Edit Page
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
  +
'''Sol Cooker (design and construction)'''
{{GoogleTranslateLinks}}
 
   
 
The '''Sol Cooker''' is the result of desire to build a solar box style oven from common recycled items. The name is a poor attempt at ''humor'' by the builder. Good food is good for the soul. Soul cooking… '''Sol cooking'''. The builder has a real daytime job not involving comedy.
{{Updated|7|10|08}}
 
[[Image:Sol_Cooker.jpg|80px|left]]
 
[[Image:Sol_Cooker_Open.JPG|right]]
 
The '''Sol Cooker''' is an attempt to build a solar box style oven from common recycled items. The name is a poor attempt at ''humor'' by the builder. Good food is good for the soul. Soul cooking… '''Sol cooking'''. The builder has a real daytime job not involving comedy.
 
   
During the summer of 2005, Terry Jantzi a Kitchener Ontario resident, designed and constructed this cooker in approximately 3 hours. The majority of the materials were sourced at the [http://www.habitat.org/env/restores.aspx Habitat ReStore] located in Waterloo Ontario. The oven sides, braces, mirrors, mirror base, rear cover of indoor/outdoor carpeting and window were all purchased for less than CDN$30. The foil pipe insulation and assorted hardware fasteners were the only purchased items.
+
During the summer of 2005, [[Terry Jantzi]] a Kitchener Ontario resident designed and constructed this cooker in approximately 3 hours. The majority of the materials were sourced at the [http://www.habitat.org/env/restores.aspx Habitat ReStore] located in Waterloo Ontario. The oven sides, braces, mirrors, mirror base, rear cover of indoor/outdoor carpeting and window were all purchased for less than CDN$30. The foil pipe insulation and assorted hardware fasteners were the only purchased items.
   
The rounded shape was selected in an attempt to resolve several design criteria. First was a need to easily aim the oven at the sun for optimum efficiency. The second requirement was to allow room for simple gimbaled pot holder. The third design requirement was to allow a shape where some parabolic capture and focusing of heat was possible. The indoor/outdoor carpeting was chosen for appearance and its resistance to mildew and rot.
+
The rounded design was a result of a desire to solve three requirements. First was a need to easily aim the oven at the sun for optimum efficiency. The second requirement was to allow room for simple gimbaled pot holder. The third design requirement was to allow a shape where some parabolic capture and focusing of heat was possible. The indoor/outdoor carpeting was chosen for appearance and its mildew and rot resistance.
   
[[Image:Sol_Cooker_Frame.JPG]]
+
[[Image:Sol_Cooker_Frame.JPG]] [[Image:Sol_Cooker_Window.JPG]]
[[Image:Sol_Cooker_Window.JPG]]
 
   
The first stage of the construction was to attach the two sides to the three braces. Ordinary drywall screws were used. The shape of the sides was determined by the size of the window that was purchased. The designer used a simple compass made out of a rope and pencil to draw circles until the window bisected the lines with enough room in the oven to fit a small oven roaster.
+
The first stage of the construction was to attach the two sides to the three braces. Ordinary drywall screws were used. The shape of the sides was determined by the size of the window that was purchased. The designer used a simple compass made out of a rope and pencil to draw circles until the window bisected the lines with enough room in the oven to fit a small oven roaster.
   
[[Image:Sol_Cooker_Carpet1.JPG]]
+
[[Image:Sol_Cooker_Carpet1.JPG]] [[Image:Sol_Cooker_Carpet2.JPG]]
[[Image:Sol_Cooker_Carpet2.JPG]]
 
   
 
The carpet was stapled to the wood frame and trimmed.
 
The carpet was stapled to the wood frame and trimmed.
Line 24: Line 19:
 
The foil insulation was cut and stapled into the oven cavity.
 
The foil insulation was cut and stapled into the oven cavity.
   
[[Image:Sol_Cooker_Closed.JPG]]
+
[[Image:Sol_Cooker_Closed.JPG]] [[Image:Sol_Cooker_Open.JPG]]
[[Image:Sol_Cooker_Open.JPG]]
 
   
 
The mirrors were mounted onto thin hardboard with an inexpensive construction adhesive.
 
The mirrors were mounted onto thin hardboard with an inexpensive construction adhesive.
 
The hinges for the mirror are mounted as shown to allow for flush folding when not in use.
 
The hinges for the mirror are mounted as shown to allow for flush folding when not in use.
   
The front leg is screwed to the oven sides to allow the leg to pivot. The oven is rotated to the proper angle and the leg is positioned to lock it in place at that position.
+
The front leg is screwed to the oven sides to allow the leg to pivot. The oven is rotated to the proper angle and the leg is positioned to lock it at that position.
   
 
'''How does it work?'''
 
'''How does it work?'''
   
[[Image:Sol_Cooker_Muskoka.JPG]]
+
[[Image:Sol_Cooker_Muskoka.JPG]] [[Image:Sol_Cooker_Garden.JPG]]
[[Image:Sol_Cooker_Garden.JPG]]
 
   
Temperatures of 275F (135C) are easily reached at midday in July at a latitude of 43 degrees north.
+
Temperatures of 275F (135C) are easily reached at midday in July at a latitude of 43 degrees north.
   
 
[[Image:Sol_Cooker_January_15.jpg]]
 
[[Image:Sol_Cooker_January_15.jpg]]
Line 43: Line 36:
 
Temperatures of 195F (91C) have been observed in January at midday with ambient temperatures of 20F (-7C) and light winds.
 
Temperatures of 195F (91C) have been observed in January at midday with ambient temperatures of 20F (-7C) and light winds.
   
[[Image:Sol_Cooker_Bread1.JPG]]
+
[[Image:Sol_Cooker_Bread1.JPG]] [[Image:Sol_Cooker_Bread2.JPG]]
[[Image:Sol_Cooker_Bread2.JPG]]
 
   
 
The oven has been in use since August 2005 and has cooked a variety of items such as rice, chicken, stews, beans, roasts, macaroni and cheese and bread.
 
The oven has been in use since August 2005 and has cooked a variety of items such as rice, chicken, stews, beans, roasts, macaroni and cheese and bread.
   
==Contact==
 
Terry Jantzi
 
   
Email: [mailto:tjantzi@p3tek.com tjantzi@p3tek.com]<br/>
 
Web: http://www.iwantarocket.com/rv6
 
 
[[Category:Solar cooker designs]]
 
[[Category:Solar cooker designs]]
 
[[Category:Solar cooker plans]]
 
[[Category:Solar cooker plans]]
[[Category:Solar box cooker designs]]
 
[[Category:Solar box cooker plans]]
 
Please note that all contributions to the Solar Cooking are considered to be released under the CC-BY-SA
Cancel Editing help (opens in new window)

Templates used on this page: